The Bale Breaker serves for unraveling of press bales.By adjusting the unraveling grade, an optimal subsequent sorting is guaranteed.

The BB-series does not crush but loosen the material for a most effective material sorting. If required, a supplemented ripping device can be installed for an additional loosening process and opening of tied bundles and cartons.

Features

• The Bale Breaker is used for breaking up bundles of PET bottles, waste paper, residual waste, plastic waste, and similar materials and transporting them in batches to further processes.
• BB does not grind the raw material, but digs it up and distributes it so that the subsequent recycling processes run smoothly.
• BB The hopper can be made with removable walls on request.
• With a hopper with side walls and a rear gate, both loose raw materials and bales can be loaded into it.

The Bag Opener opens the plastic bags and transfers the metered material to the subsequent sorting and preparation plants. The machine is available as a standard model or in combination with a charging hopper. The hopper is fed batchwise by a front loader.

Features:

• Opens and empties virtually 100% plastic bags *
• Large opening of "bags in bags" *
• Suitable for many materials, such as packaging materials, residual waste, household waste, paper waste *
• Has protection against tangling and wrapping of ropes, tapes, wires and foil *
• Free and even feeding of materials to the sorting process *
• Low maintenance and service requirements *
• Remote protection and automatic shut-off in the event of blockage due to large and hazardous substances *
• Large hopper for loading loaded with a forklift *

Dismantler for small waste bags

The BOS opens the small plastic waste bags and transfers the materials to downstream sorting and recovery plants. The BOS is available in basic design. In combination with a pre-connected Feed and Metering Hopper of the D-series the Bag Opener will reach its highest efficiency. The hopper is charged batchwise per front-end loader or gripper.

Features

• BOS opens small plastic waste bags and delivers materials for further sorting and recycling *
• Simple BOS design possible. *
• Together with the connected D-Series feed and dosing hopper, the BOS bag opener achieves the best performance.
• The hopper is loaded in portions using a loader or grabs. *

Ballistic Classifier for the Separation of Several Fractions of Packaging Waste, Household Waste, Commercial Waste and Mixed Construction Waste

Features:

• Sturdy and solid design of the Ballistic Separator
• Separation into three fractions done in one step
• High separation quality
• Dedusting and cleaning of lightweight fraction from fine debris and adhesions
• Optimal separation result with different materials
• Maintenance-friendly bearings and shafts
• Exchangeable sieve grids on the paddles
• Easy and direct drive system

BPS (Ballistik Paper Sorter) is used for sorting waste paper and separating paper and cardboard and for sifting small problematic impurities from waste paper, especially to improve the quality of the waste.

Features:

• Durable machine design for long-term application *
• Shaft with patented eccentric bearings *
• Durable replaceable bearings *
• Patented adjustable screen opening *
• Different types for different purposes *
• Screening area from 11 m2 to 42 m2 *
• Blade width 338 mm *
• 6/8/12/16/24 blades*
• 2 wide blade screens available *
• Throughput from 6 t / h to 45 t / h *
• Easy to maintain *
• High rise *

D feed and dosing hoppers are designed for continuous and even feeding of various materials to further processes.

D feed and dosing hoppers are designed for continuous and even feeding of various materials to further processes. They are equipped with a frequency converter that regulates the flow of raw materials to the moving floor conveyor.

Features

• D feed and dosing hoppers are designed for continuous and even feeding of various materials.
• They are equipped with a frequency converter that regulates the flow of raw materials to the moving floor conveyor.
• They are equipped with a frequency converter that regulates the flow of raw materials to the moving floor conveyor.

MF moving floor conveyors can be made of almost any length and width and can be fitted to hoppers of any capacity.

Features:

• Transport of all types of material, regardless of weight, moisture, stickiness or abrasiveness
• Modular design for any size required *
• Unlimited adjustable transport speed *
• Easy integration into existing material hoppers *
• Also available in a portable rugged design *
• No rotating parts, so there is no risk of entanglement *
• High performance, shockproof *
• As required with measuring and unloading devices *
• Thanks to the design, the devices can be transported completely assembled. *

Feed hoppers with an integral decompactor are used in mechanical and biological waste treatment facilities. They are used for taking up, buffering and dosed feeding of green, biological waste, organic production residues, plastic waste, etc.

Features

• DC feed hoppers with integrated decompact are used in mechanical and biological waste treatment facilities.
• They are used for raw, biological, organic production residues, plastic waste, etc. for picking, buffering, and feeding.