Vertical multi-chamber baling press MK 1100

Code: MK 1100

The multi-chamber baler MK 1100 enable sorted compaction of your recyclables.It can be collected in two or more press chambers. For annual material amount approximately 30 to 50 tons.

Vertical multi-chamber baler compacts material to 1,1 x 0,7 x 0,8 m bales with a maximum weight of 250 kg.

Privalumai:

Sorted separation
One press for different materials
Easy and safe operation.
Comfortable insertion from above
Volume reduction up to 90%
Savings in storage and transportation costs

Out of stock

Vertical multi-chamber baling press MK 1100

“One for all” - Paper, cardboard and film is disposed of sorted in one press!

If one chamber of the baler is filled the moveable press stroke compacts the material inside that chamber into bales. Extras: The press shield guiding system TopPlus® stabilized the press shield during the press process and increases the life duration of the components. Two-hand operation ensures a safe operation when the hydraulical bale ejector BaleMatic® guarantees a comfortable and secure bale ejection.

Possible also with 3 and more chambers</strong

	MK700	MK1100
Door level	x	x
EasyTie	x	x
Tying with strap
Tying with wire	x	x
Bale ejection cart	x
BaleMatic®		x
Material selection switch	x	x
Press shield guidance TopPlus®	x	x
Time control	x	x
CircleSystem®	x	x
Technical data
Pressing force in kN	40/60	200
Bale weight in kg max.	50	250
Bale dimensions in m (l x b x h)	0,7 x 0,5 x 0,8	1,1 x 0,7 x 0,8
Cycle time in seconds	32	32
Electrical connection	230V 50Hz 1,5kW/400V 50Hz 2,2kW	400V 50Hz 4kW

Top plus®
Even with uneven filling of the press chamber an unbalance of the press plate is excepted due to the stable press plate guidance TopPlus®.

BaleMatic®
Safe bale ejection by hydraulical ejector and a long lifetime due to the separate cylinder.

QuickDoor®
Space saving swinging-sliding door with automatic opening for a safe and quick filling of the baler. No manual pressing of material into the chamber anymore.

CircleSystem®
Integrated down-holders prevent reexpansion of the material inside the chamber and ensure a higher bale density.

Time control
The press plate compacts the bale with full power for a specific time. Thereby high bale density and bale weights are reached. With pressure control, in contrast, press plate immediately moves up.

EasyTie
The bale is tied ergonomic friendly and fast whilst opened door.

HydroClose
The hydraulical door lock controls the re-expansion forces of big bales. A separate cylinder opens the door controlled and slowly so unexpected opening is avoided.

Integrated strap- & wire hooks
In the press plate integrated strap- and wire hooks ensure an easy, comfortable and fast bale tying.

PowerSave®
Energy-efficient control of the press plate due to the tandem pump. In comparison with single-pump systems 50 % energy costs are saved.

Vertical multi-chamber baling press MK 1100